Replacement Carbon Brushes for TTB236MSW Mitre Saw (Pair).
Restore consistent motor power, prevent motor hesitation, and eliminate excessive sparking with a replacement pair of carbon brushes. Sized specifically for the TTB236MSW Mitre Saw, these quality non-OEM brushes provide a direct, reliable, and cost-effective fix for worn down or burnt-out original brushes.
Quality Non-OEM Replacement | Free Delivery to All UK Postcodes | Dispatched Fast
Workshop mitre saws handle heavy electrical loads and continuous friction when cutting through hardwoods, structural timber, and composite profiles. Over time, friction against the spinning motor commutator naturally erodes the carbon blocks. Severely worn brushes cause common motor faults, including sudden cut-outs under load, reduced blade torque, failure to start, or noticeable arcing and sparks visible through the motor ventilation slots. Replacing worn brushes is vital preventative maintenance that prevents irreversible electrical pitting on the copper commutator. Sized at 10.8mm x 16.4mm x 6.8mm with integrated compression springs and 10.5mm coil ends, this matched pair restores positive electrical flow so your saw operates at full strength.
TTB236MSW Compatibility
Precision-dimensioned (10.8 x 16.4 x 6.8mm) to slide freely inside the brush holders of TTB236MSW mitre saws without sticking or binding.
Spring-Loaded Design
Fitted with high-conductivity copper shunts, durable compression springs, and 10.5mm coil ends to maintain steady contact pressure against the commutator.
Important Fitment & Non-OEM Information:
These are high-quality non-OEM replacement parts sourced to help keep your workshop power tools operating smoothly and affordably. We are not affiliated with the original tool manufacturer.
Please verify your dimensions before ordering: Always remove and check your existing brushes (Block: 10.8 x 16.4 x 6.8mm; Coil Width: 10.5mm; Total Length: approx. 42.7mm straightened) to confirm exact compatibility with your tool before placing an order.
| Model Suitability |
TTB236MSW (TTTB236MSW) Sliding Compound Mitre Saw |
| Component Type |
Motor Carbon Brushes with Springs & Caps |
| Brush Dimensions |
10.8mm x 16.4mm x 6.8mm |
| Coil End Width |
10.5mm |
| Total Length (Straightened) |
Approx. 42.7mm (Brush tip to coil end) |
| Condition |
Brand New Non-OEM Replacement |
| Quantity Supplied |
1 Pair (2 Carbon Brushes) |
John Ward - 13/06/2022 
Verified
Pair of Carbon Brushes.
The service was very good. Arrived in good order and promptly. Thank you.
Delivery:
Ease of Use:
Assembly:
Build Quality:
Performance:
Review this product
You must
sign in to post a product review.