Replacement Carbon Brushes for TTB673CSW Plunge Saw (Pair).
Restore consistent motor torque, eliminate excessive sparking, and bring your track plunge saw back to peak cutting performance with a replacement pair of carbon brushes. Specifically sized for the TTB673CSW Plunge Saw, these quality non-OEM brushes provide a direct, reliable, and cost-effective fix for worn down or burnt-out original brushes.
Quality Non-OEM Replacement | Free Delivery to All UK Postcodes | Dispatched Fast
Plunge saws operate under high friction and demanding electrical loads when executing long, splinter-free rip cuts through solid oak, sheet materials, and worktops. Over extended use, friction against the spinning armature commutator naturally wears away the conductive carbon blocks. Depleted brushes lead to common motor symptoms, such as sudden hesitation mid-cut, diminished blade speed, failure to power on, or aggressive electrical sparking visible through the motor casing vents. Replacing worn brushes early is critical preventative maintenance that shields the motor‘s copper commutator from permanent electrical pitting and expensive burnout. Sized at 9.8mm x 14.9mm x 5.7mm with flexible copper shunts, durable compression springs, and 9.0mm coil ends (approx. 36.0mm straightened length), this matched pair restores clean electrical conductivity so your saw cuts cleanly and accurately.
TTB673CSW Compatibility
Precision-dimensioned (9.8 x 14.9 x 5.7mm) to slide freely inside the brush holders of TTB673CSW plunge saws without sticking or binding.
Spring-Loaded Design
Fitted with high-conductivity copper braid, resilient compression springs, and 9.0mm coil caps to maintain steady contact pressure against the commutator.
Important Fitment & Non-OEM Information:
These are high-quality non-OEM replacement parts sourced to help keep your workshop power tools operating smoothly and affordably. We are not affiliated with the original tool manufacturer.
Please verify your dimensions before ordering: Always remove and measure your existing brushes (Block: 9.8 x 14.9 x 5.7mm; Coil Width: 9.0mm; Total Length: approx. 36.0mm straightened) to confirm exact compatibility with your tool before placing an order.
| Model Suitability |
TTB673CSW Circular Plunge / Track Saw |
| Component Type |
Motor Carbon Brushes with Springs & Caps |
| Brush Dimensions |
9.8mm x 14.9mm x 5.7mm |
| Coil End Width |
9.0mm |
| Total Length (Straightened) |
Approx. 36.0mm (Brush tip to coil end) |
| Condition |
Brand New Non-OEM Replacement |
| Quantity Supplied |
1 Pair (2 Carbon Brushes) |
John Cuthbert - 07/09/2026 
Verified
John Cuthbert
Easy fix worked perfectly
Delivery:
Ease of Use:
Assembly:
Build Quality:
Performance:
Review this product
You must
sign in to post a product review.