Replacement Carbon Brushes for SF10N1 Mitre Saw (Pair).
Restore reliable motor power, eliminate excessive sparking, and bring your power tool back to life with a replacement pair of motor carbon brushes. Specifically sized for the SF10N1 Mitre Saw, these quality non-OEM brushes provide a cost-effective, straightforward fix for worn or burnt-out original brushes.
Quality Non-OEM Replacement |
Free Delivery to All UK Postcodes |
Dispatched Fast
Mitre saws endure demanding duty cycles when slicing through dense hardwoods, framing timber, and composite boards. Over time, friction against the spinning armature commutator naturally wears down the internal carbon blocks. When carbon brushes wear beyond their service limit, symptoms include intermittent power cut-outs, diminished motor torque, a failure to start, or noticeable arcing and sparking visible through the motor vents. Replacing worn brushes early is essential preventative maintenance that protects the motor commutator from expensive electrical pitting. Featuring a 13.4mm x 16.2mm x 6.3mm carbon block with integrated tension springs and 12.1mm coil ends, this pair restores consistent electrical contact so your saw runs smoothly and reliably.
SF10N1 Compatible Fitment
Precision-dimensioned (13.4 x 16.2 x 6.3mm) to slide freely inside the brass brush holders of SF10N1 mitre saws without sticking.
Integrated Spring & Coil
Fitted with flexible copper shunts, durable compression springs, and 12.1mm retaining coil ends to ensure optimal contact pressure against the commutator.
Important Fitment & Non-OEM Information:
These are high-quality non-OEM replacement parts sourced to help keep your tools operating smoothly and affordably. We are not affiliated with the original tool manufacturer.
Please verify your dimensions before ordering: Always remove and measure your existing brushes (Block: 13.4 x 16.2 x 6.3mm; Coil Width: 12.1mm; Total Length: approx. 41.1mm straightened) to confirm exact compatibility before placing an order.
| Model Suitability |
SF10N1 Sliding Mitre Saw |
| Component Type |
Motor Carbon Brushes with Springs & Caps |
| Brush Dimensions |
13.4mm x 16.2mm x 6.3mm |
| Coil End Width |
12.1mm |
| Total Length (Straightened) |
Approx. 41.1mm (Brush tip to coil end) |
| Condition |
Brand New Non-OEM Replacement |
| Quantity Supplied |
1 Pair (2 Carbon Brushes) |
Review this product
You must
sign in to post a product review.