Replacement Carbon Brushes for SF210JSL Mitre Saw (Pair).
Restore smooth motor power, prevent intermittent stalling, and eliminate excessive motor sparking with a replacement pair of carbon brushes. Specifically sized for the SF210JSL Mitre Saw, these quality non-OEM brushes provide a direct, reliable, and cost-effective fix for worn down or damaged original brushes.
Quality Non-OEM Replacement | Free Delivery to All UK Postcodes | Dispatched Fast
Compound mitre saws handle heavy electrical loads and high friction while powering through dense hardwoods, composite decking, and framing timber. Over time, friction against the spinning motor commutator naturally erodes the carbon blocks. Severely worn brushes cause noticeable operational issues, including stuttering under load, sudden power loss, reduced cutting torque, or aggressive arcing and sparking visible through the motor housing vents. Replacing worn brushes promptly is critical preventative maintenance that protects the copper commutator from expensive pitting and burnout. Sized at 13.4mm x 16.4mm x 6.3mm with integrated tension springs and 11.6mm coil ends, this matched pair restores positive electrical conductivity so your saw runs at full strength.
SF210JSL Compatibility
Precision-dimensioned (13.4 x 16.4 x 6.3mm) to slide freely inside the brush holders of SF210JSL mitre saws without binding or jamming.
Spring-Loaded Design
Fitted with flexible copper shunts, durable compression springs, and 11.6mm coil ends to ensure consistent contact pressure against the commutator.
Important Fitment & Non-OEM Information:
These are high-quality non-OEM replacement parts sourced to help keep your workshop power tools operating smoothly and affordably. We are not affiliated with the original tool manufacturer.
Please verify your dimensions before ordering: Always remove and check your existing brushes (Block: 13.4 x 16.4 x 6.3mm; Coil Width: 11.6mm; Total Length: approx. 40.1mm straightened) to confirm exact compatibility with your specific model version.
| Model Suitability |
SF210JSL Sliding Compound Mitre Saw |
| Component Type |
Motor Carbon Brushes with Springs & Caps |
| Brush Dimensions |
13.4mm x 16.4mm x 6.3mm |
| Coil End Width |
11.6mm |
| Total Length (Straightened) |
Approx. 40.1mm (Brush tip to coil end) |
| Condition |
Brand New Non-OEM Replacement |
| Quantity Supplied |
1 Pair (2 Carbon Brushes) |
Stephen Davidson - 30/06/2026 
Verified
Carbon brushes
Perfect.
Delivery:
Ease of Use:
Assembly:
Build Quality:
Performance:
James Young - 02/10/2025 Verified
Mitre saw bushes
Fitted perfectly. Saw now working Thanks
Delivery:
Ease of Use:
Assembly:
Build Quality:
Performance:
Raymond North - 23/11/2023 Verified
Carbon Brushes
As advertised replacement part all ok.
Delivery:
Ease of Use:
Assembly:
Build Quality:
Performance:
Michael Baseley - 06/02/2023 Verified
Carbon brush replacement set
Worked fine no problems fitting the brush sliding chopsaw works as good as new
Delivery:
Ease of Use:
Assembly:
Build Quality:
Performance:
Sam Mulligan - 16/01/2021 Verified
Pair of Carbon Brushes for Mitre Saw.
Extremely good service got my Miter saw running great again.Would recommend this companys fast response.
Delivery:
Ease of Use:
Assembly:
Build Quality:
Performance:
Terry Gregory - 09/12/2020 Verified
Motor brushes
Well pleased saw working great
Delivery:
Ease of Use:
Assembly:
Build Quality:
Performance:
Review this product
You must
sign in to post a product review.