Throttle Lever (TPM250E)
Replacement part for the Mule TPM250E
A replacement thumb throttle lever for the Titan Pro Mule TPM250E electric tracked barrow. It is the speed control lever on the handlebar, used to set the speed of the machine.
The lever has a black textured grip on a zinc-plated metal arm, mounted on a black housing with a hole for the throttle cable. A zinc-plated two-leg clamp bracket with slotted eye ends is used to fix the lever in place, and a central screw with a spring washer holds the lever on its pivot.
Fits
Mule TPM250E electric tracked barrow
Supplied as
1 x throttle lever, as photographed
Finish
Black textured grip, zinc-plated bracket
Free UK Delivery
Free delivery to standard UK postcodes
How to identify the right part
- Check that your machine is a Mule TPM250E electric tracked barrow.
- On the TPM250E the speed control is a thumb throttle among the handlebar controls. Compare your lever with the photographs.
- If you are not sure, email a photo of your handlebar controls to techsupport@titan-pro.co.uk before ordering.
Fitting and use
Disconnect the main power connector before working on the controls. After fitting, set the throttle to the minimum (upright) position before starting the motor, as described in the Mule TPM250E operator manual.
Mule spares links
Looking for the machine or other parts?
| Product |
| Product type |
Replacement thumb throttle lever (speed control) |
| Model compatibility |
Titan Pro Mule TPM250E Electric Tracked Barrow |
| Lever grip |
Black, textured |
| Lever arm and bracket |
Zinc-plated metal; two-leg clamp bracket with slotted eye ends |
| Housing |
Black, with a hole for the throttle cable |
| Supplied as |
1 x throttle lever |
| Condition |
New |
| Delivery |
| Delivery |
Free UK delivery (Royal Mail Tracked 48 to standard UK postcodes) |
| Related links |
Mule tracked barrow and TPM250E Mule spares |
Review this product
You must
sign in to post a product review.
Frequently asked questions
Which machine does this throttle lever fit?
The Titan Pro Mule TPM250E electric tracked barrow.
What does the throttle lever do?
It is the thumb throttle (speed control) on the handlebar controls. It sets the speed of the machine. The operator manual says to set the throttle to the minimum (upright) position before starting the motor.
How do I fit it?
Disconnect the main power connector before you start. Remove the old lever, fit the new lever using the same clamp bracket position and fixings, and reconnect the throttle cable. If you are unsure, email techsupport@titan-pro.co.uk with a photo of your handlebar controls.
How do I know whether this is the right lever for my barrow?
Compare the lever with the photographs: it has a black textured grip on a metal arm, with a two-leg clamp bracket. If you are unsure, email a photo of your handlebar controls to techsupport@titan-pro.co.uk or call 01258 489161.
How is it delivered?
Free UK delivery via Royal Mail Tracked 48. See our shipping page for full details.