TPM250E 450KG Electric Tracked Barrow FAQ

Yes, watch the Mule tracked barrow at work in our product video below:

Yes, we carry a comprehensive range of spares for the Mule Transporter.

Yes, we sell a custom-fit cover for this machine. However, as this is an electric machine, we strongly advise storing it inside or under a solid shelter whenever possible to protect the electrical terminals from damp.

Yes. The machine is designed with a narrow width of 750mm (75cm), allowing it to pass through most standard garden gates comfortably.

Assembled Dimensions: 1540mm (L) x 700-750mm (W) x 1100mm (H)

For custom builds or specific access requirements, please find the technical measurements below:

• Highest Point of Track to Ground: 330mm
• Ground to Top of Battery Box: 340mm
• Track Center-to-Center: 410mm
• Overall Track Length: 640mm
• Ground Clearance: 140mm

You can see the tracked chipper (Beaver) configuration in action here:

We have produced a video showing exactly how to configure and assemble the expandable bed on this barrow:

The following video shows how to start and stop the drive functionality. Note: This applies to models from 2023 and later.

Learn how to operate the machine and select between the different speed gears:

The gearbox requires approximately 2 Litres of EP80w 90 GL5 gear oil.

Note: Machines are shipped dry (without oil) unless the Gold PDI service is selected. You must fill the gearbox before use.

This machine uses 5x Sealed Lead Acid batteries. To maintain their lifespan:

• Charge immediately after every use.
• Never store flat. If storing over winter, charge the batteries at least every 6 weeks to prevent them from degrading.

The following video shows how to adjust the track tension on the Mule tracked barrow.

We have a PDF guide outlining how to replace the speed sensor (throttle position sensor) on this model.

Watch our guide on how to replace the control handle: